DG 1103 Waterfall Splashback
From $319.70
GlassArt offers two standard splashback sizes, each featuring a wide range of printed designs, designed for easy DIY installation. Choose from our GlassArt image gallery, browse millions of options via Shutterstock, or upload your own image for a more personalised finish. To use your own image, simply select ‘Custom Design’. Please note that while images are digitally optimised to closely represent the final product, colours and detail may vary slightly once printed on glass.
• 750mm high x 600mm wide | Weight 5.6kg
• 750mm high x 900mm wide | Weight 8.5kg
• 5mm toughened glass
•Ensure the wall is clean, dry, and free from obstructions, grease, or dirt.
• Apply a thin bead of neutral-cure silicone along the benchtop where the glass will meet the wall behind the hob.
• Apply silicone to the painted side of the glass, keeping it 40–50 mm from the edges. Use small amounts only (approx. 30 mm diameter per dab). Do not use the entire tube.
• Position the glass by resting it on the bottom edge first, then gently push it toward the wall until firm contact is made.
• Check alignment and adjust the glass if necessary before the silicone sets.
• Allow 24 hours for the silicone to fully cure. Do not move or adjust the splashback during this time. Note: Curing time may be longer in colder temperatures.
All orders are shipped nationwide. Delivery timeframes and freight costs vary depending on the product type and size. Standard items may be eligible for return or exchange in line with our Returns and Refunds Policy, while customised products are made to order and are non-refundable. Please review our Shipping and Returns & Refunds policies for full details before purchasing.